IMPROVING TAILINGS DAM RISK MANAGEMENT BY 3D CHARACTERIZATION FROM RESISTIVITY TOMOGRAPHY TECHNIQUE: CASE STUDY IN SÃO PAULO – BRAZIL

Lorena Andrade Oliveira; Marco Antonio Braga; Guilherme Prosdocimi; Alan de Souza Cunha; Leonardo Santana and Filipa da Gama

ABSTRACT

Tailings dams are traditionally monitored by routine visual inspections combined with the use of instruments such as piezometers, topographical landmarks, and water level indicators. As they are structures that have high potential damage associated, the use of robust investigation methods is essential to ensure the operational safety of these dams. Geoelectrical methods have been successful in mapping humid zones inside the tailings dam structures, using the proper acquisition parameters and data sampling that these methods allow. This is a promising approach to investigating a tailings dam with a heterogeneous embankment made of limestone tailings, that has been in operation for 50 years in S˜ao Paulo state, Brazil. Considering its structural complexity, electrical resistivity sections were acquired with a tight profile spacing – of 10 to 15 m, processed, and modeled by applying a specific workflow. The Electrical Resistivity Tomography (ERT) operational workflow applied to the dataset obtained from two field campaigns, conducted in the embankment and the right abutment of the dam, performed well in mapping possible high water content zones inside the structure, defining a relevant element for the risk assessment. For this purpose, compartmentalization of the resistivity ranges, and three dimensional modeling techniques were used, both constrained by the geotechnical instruments of the structure. The embankment campaign mapped zones of attention in the right abutment driving the decision to perform a follow-up survey dedicated to this region. The right abutment campaign mapped zones of high resistivity, associated with the natural terrain, composed of sandy soils, saprolite, and rock, as well as zones of low resistivity related to high moisture content regions. The geometry of these conductive zones made it possible to infer the depth of the water table in the region between the direct measurements from the instrumentation and to model zones with low resistivity values. The 3D modeling revealed that part of the conductive zones, present in the right abutment and extending to the embankment indicate a possible contribution of moisture from the natural terrain towards the embankment of the dam. Thus, the achieved results demonstrated that 3D modeling applied to the combination of the geotechnical and geophysical datasets contributes to expanding the knowledge of the internal structure of the dam and consequently the safety of the operations, especially where there is no instrumentation, improving the tailings dam risk management.

Key words: Geo-electrical method; Geotechnics; Tailings dam; Resistivity tomography; Dam operational safety